Latest CLSSGB Exam Dumps For Certified Lean Six Sigma Green Belt (CLSSGB) Certification

2024 GAQM Official New Released CLSSGB ♥♥
https://www.certleader.com/CLSSGB-dumps.html


Our pass rate is high to 98.9% and the similarity percentage between our CLSSGB study guide and real exam is 90% based on our seven-year educating experience. Do you want achievements in the GAQM CLSSGB exam in just one try? I am currently studying for the GAQM CLSSGB exam. Latest GAQM CLSSGB Test exam practice questions and answers, Try GAQM CLSSGB Brain Dumps First.

Online CLSSGB free questions and answers of New Version:

NEW QUESTION 1
One of the metrics commonly used in Lean Six Sigma is DPU. This acronym stands for __________.

  • A. Deferred planned usage
  • B. Defects per unit
  • C. Decreased production utilization
  • D. Downtime per unit

Answer: B

NEW QUESTION 2
Significant variation in process performance is a consequence of several causes that can be classified using which of the terminologies shown. (Note: There are 2 correct answers).

  • A. Common
  • B. Random
  • C. Uneducated
  • D. Special
  • E. Vital

Answer: AD

NEW QUESTION 3
SPC charts typically have the most recent data point on the right hand side.

  • A. True
  • B. False

Answer: A

NEW QUESTION 4
To create standardization of financial benefit calculations project savings are typically based on savings over what period of time?

  • A. 6 months
  • B. 12 months
  • C. 24 months
  • D. The remainder of the calendar year
  • E. The remainder of the fiscal year

Answer: B

NEW QUESTION 5
A Belt gathered the following defect data for a shoe production line and wanted to assemble it into a Pareto Chart. The correct order from left to right in the chart would be:
Data: Cutting38 Forming17 Stitching56 Sealing42

  • A. Forming, Sealing, Cutting, Stitching
  • B. Sealing, Stitching, Forming, Cutting
  • C. Stitching, Sealing, Cutting, Forming
  • D. Forming, Cutting, Sealing, Stitching

Answer: C

NEW QUESTION 6
If a process has Outliers which pair of charts is most preferable if subgroups will exist for the Continuous Data?

  • A. Individual-Moving Range
  • B. Xbar-R Charts
  • C. Xbar-S Charts
  • D. nP and P Charts

Answer: B

NEW QUESTION 7
The Accuracy of a Measurement System addresses __________.

  • A. Stability, Bias & Linearity
  • B. Repeatability & Reproducibility
  • C. Stability & Sensitivity
  • D. Precision & Sensitivity

Answer: A

NEW QUESTION 8
Which of these is Discrete data?

  • A. Train arrived at 4:17 pm.
  • B. Race car consumed 23 gallons of fuel.
  • C. Of the 42 people on the bus, 12 went into the station.
  • D. It took 3 hours and 32 minutes to complete the marathon.

Answer: C

NEW QUESTION 9
When constructing a Fishbone Diagram using the __________ approach is the most classic arrangement.

  • A. 6M
  • B. 4M
  • C. 5M
  • D. Alphabetical

Answer: A

NEW QUESTION 10
The Mann-Whitney Test is used to test if the Means for two samples are different.

  • A. True
  • B. False

Answer: B

NEW QUESTION 11
According to a manager it takes an average weekday commute of 39 minutes with a Standard Deviation of 7 minutes for the employees to get to work while they use their personal vehicles for their office commute while the management set a policy of not more than 40 minutes for their daily one-way commute. A survey conducted one day on 70 employees showed an average of 34 minutes commuting time using the metro public transportation system with a Standard Deviation of 21 minutes. If the Standard Deviation is uncontrollable then the other option to increase the probability of coming in on time via personal vehicles to work could be __________?

  • A. Increase the average time of commute
  • B. Maintain the average time of commute and change route to work
  • C. Reduce average commute time to work by departing earlier
  • D. Change policy at work and request for flexible times based on location

Answer: C

NEW QUESTION 12
The Mann-Whitney Test is used to test if the Means for two samples are different.

  • A. True
  • B. False

Answer: B

NEW QUESTION 13
For a Normal Distribution the Mean, Median and Mode are the same data point.

  • A. True
  • B. False

Answer: A

NEW QUESTION 14
Lean focuses on the sequence of activities and work required to produce a product or a service. This flow is called a __________.

  • A. Value-add Flow
  • B. Production Map
  • C. Value Stream
  • D. Operating Procedure

Answer: C

NEW QUESTION 15
Cost of Poor Quality (COPQ) can be classified as either Tangible (Visible) Costs or Hidden Costs.

  • A. True
  • B. False

Answer: A

NEW QUESTION 16
According to the definition of Rolled Throughput Yield which of these items best describe the purpose of RTY?

  • A. A function of Y=f(x)
  • B. Accounts for losses due to rework and scrap
  • C. Isolates the increase throughput
  • D. Determines incremental Growth

Answer: B

NEW QUESTION 17
According to a manager it takes an average weekday commute of 39 minutes with a Standard Deviation of 7 minutes for the employees to get to work when they use their personal vehicles for their office commute while management set a policy of not more than 40 minutes for their daily one-way commute. A survey conducted one day on 70 employees showed an average of 34 minutes commuting time using the metro public transportation system with a Standard Deviation of 21 minutes. For the employees choosing to increase their chances to come on time using personal transportation their variation should be reduced to __________?

  • A. 1 minute
  • B. 6 minutes
  • C. 3.5 minutes
  • D. Eliminate it to 0.0 minutes

Answer: C

NEW QUESTION 18
The Z score is a measure of the distance in Standard Deviations of a sample data point from the Median of the sample population.

  • A. True
  • B. False

Answer: B

NEW QUESTION 19
The very best way to begin an effort to map a process is to do which of these?

  • A. Interview the process owner
  • B. Interview the manager of the department
  • C. Walk the actual process from beginning to end
  • D. Take pictures of the factory floor at each shift

Answer: C

NEW QUESTION 20
When constructing a Fishbone Diagram using the __________ approach is the most classic arrangement.

  • A. 6M
  • B. 4M
  • C. 5M
  • D. Alphabetical

Answer: A

NEW QUESTION 21
......

Thanks for reading the newest CLSSGB exam dumps! We recommend you to try the PREMIUM Allfreedumps.com CLSSGB dumps in VCE and PDF here: https://www.allfreedumps.com/CLSSGB-dumps.html (200 Q&As Dumps)