Leading 70-410 Exam Study Guides With New Update Exam Questions
Examcollection offers free demo for 70 410 pdf exam. "Installing and Configuring Windows Server 2012", also known as 70 410 practice exam exam, is a Microsoft Certification. This set of posts, Passing the Microsoft 70 410 practice exam exam, will help you answer those questions. The mcsa 70 410 Questions & Answers covers all the knowledge points of the real exam. 100% real Microsoft 70 410 exam questions exams and revised by experts!
2024 Microsoft Official New Released 70-410 ♥♥
https://www.certleader.com/70-410-dumps.html
P.S. Free 70-410 study guides are available on Google Drive, GET MORE: https://drive.google.com/open?id=1mVqUlTKr4Zx1buWZOoc2gsS2cxrB6UuY
New Microsoft 70-410 Exam Dumps Collection (Question 6 - Question 15)
New Questions 6
Your network contains three servers that run Windows Server 2012 R2. The servers are configured as shown in the following table. Server3 is configured to obtain an IP address automatically.
You need to ensure that Server3 only receives an IP address from Server1. The IP address must always be the same.
Which two tasks should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Create an exclusion on Server1.
B. Create a filter on Server1.
C. Create a reservation on Server2
D. Create a reservation on Server1
E. Create a filter on Server2.
Answer: D,E
New Questions 7
Your network contains an Active Directory domain named contoso.com. The domain contains a member server named HVServer1. HVServer1 runs Windows Server 2012 R2 and has the Hyper-V server role installed. HVServer1 hosts two virtual machines named Server1 and Server2. Both virtual machines connect to a virtual switch named Switch1.
On Server2, you install a network monitoring application named App1.
You need to capture all of the inbound and outbound traffic to Server1 by using App1. Which two commands should you run from Windows PowerShell? (Each correct answer
presents part of the solution. Choose two.)
A. Get-VM u201cServer2 | Set-VMNetworkAdapter -IovWeight 1
B. Get-VM u201cServer1 | Set-VMNetworkAdapter -Allow/Teaming On
C. Get-VM u201cServer1 | Set-VMNetworkAdapter -PortMirroring Source
D. Get-VM u201cServer2 | Set-VMNetworkAdapter -PortMirroring Destination
E. Get-VM u201cServer1 | Set-VMNetworkAdapter -IovWeight 0
F. Get-VM u201cServer2 | Set-VMNetworkAdapter-AllowTeaming On
Answer: C,D
New Questions 8
Your network contains an Active Directory domain named adatum.com. The domain contains a file server named Server2 that runs Windows Server 2012 R2. Server2 contains a shared folder named Home. Home contains the home folder of each user.
All users have the necessary permissions to access only their home folder.
A user named User1 opens the Home share as shown in the exhibit. (Click the Exhibit button.)
You need to ensure that all users see only their own home folder when they access Home. What should you do from Server2?
A. From Windows Explorer, modify the properties of Home.
B. From Server Manager, modify the properties of the volume that contains Home.
C. From Windows Explorer, modify the properties of the volume that contains Home.
D. From Server Manager, modify the properties of Home.
Answer: : D
Explanation:
Access-based Enumeration is a new feature included with Windows Server 2003 Service Pack 1. This feature based file servers to list only the files and folders to which they have allows users of Windows Server 2003 access when browsing content on the file server. This eliminates user confusion that can be caused when users connect to a file server and encounter a large number of files and folders that they cannot access.
Access-based Enumeration filters the list of available files and folders on a server to include only those that the requesting user has access to. This change is important because this allows users to see only those files and directories that they have access to and nothing else. This mitigates the scenario where unauthorized users might otherwise be able to see the contents of a directory even though they donu2021t have access to it.
New Questions 9
Your network contains an Active Directory domain named contoso.com. The domain contains a user account named User1 that resides in an organizational unit (OU) named OU1.
A Group Policy object (GPO) named GPO1 is linked to OU1. GPO1 is used to publish several applications to a user named User1.
In the Users container, you create a new user named User2.
You need to ensure that the same applications are published to User2. What should you do?
A. Modify the settings in GPO1.
B. Move User2 to OU1
C. Link a WMI filter to GPO1.
D. Modify the security of GPO1.
Answer: B
Explanation:
Moving User2 to OU1 will give him the same access as User1.
The GPO is linked to OU1. By moving User2 to OU1 the GPO will be applied to this user.
New Questions 10
You have a server named Server1. Server1 runs a Server Core installation of Windows Server 2012 R2. The local area connection on Server1 has the following configuration:
u2711 IP address: 10.1.1.1
u2711 Subnet mask: 255.255.240.0
u2711 Default gateway: 10.1.1.254
u2711 Preferred DNS server: <none>
The network contains a DNS server that has an IPv4 address of 10.1.1.200. You need to configure Server1 to use 10.1.1.200 as the preferred DNS server. The solution must not change any other settings on Server1.
Which command should you run?
A. sconfig.cmd
B. net.exe
C. Set-NetIPInterface
D. netsh.exe
Answer: A
Explanation:
In Windows Server 2012 R2, you can use the Server Configuration tool (Sconfig.cmd) to configure and manage several common aspects of Server Core installations.
Network settings
You can configure the IP address to be assigned automatically by a DHCP Server or you can assign a static IP address manually. This option allows you to configure DNS Server settings for the server as well.
New Questions 11
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. Server1 runs Windows Server 2012 R2 and has the Hyper-V server role installed. On Server1, you create and start a virtual machine named VM1. VM1 is configured as shown in the following table.
You plan to create a snapshot of VM1. You need to recommend a solution to minimize the amount of disk space used for the snapshot of VM1. What should you do before you create the snapshot?
A. Run the Stop-VM cmdlet.
B. Run the Convert-VHD cmdlet.
C. Decrease the Maximum RAM
D. Decrease the Minimum RAM.
Answer: A
Explanation:
What are virtual machine snapshots?
Virtual machine snapshots capture the state, data, and hardware configuration of a running
virtual machine.
What are snapshots used for?
Snapshots provide a fast and easy way to revert the virtual machine to a previous state. For this reason, virtual machine snapshots are intended mainly for use in development and test environments. Having an easy way to revert a virtual machine can be very useful if you need to recreate a specific state or condition so that you can troubleshoot a problem. There are certain circumstances in which it may make sense to use snapshots in a production environment.
For example, you can use snapshots to provide a way to revert a potentially risky operation in a production environment, such as applying an update to the software running in the virtual machine.
How are snapshots stored?
Snapshot data files are stored as .avhd files. Taking multiple snapshots can quickly consume storage space. In the first release version of Hyper-V (KB950050) and in Hyper-V in Windows Server 2008 Service Pack 2, snapshot, snapshot data files usually are located in the same folder as the virtual machine by default. In Hyper- V in Windows Server 2008 R2, the files usually are located in the same folder as the virtual hard disk. The following exceptions affect the location of the snapshot data files: If the virtual machine was imported with snapshots, they are stored in their own folder. If the virtual machine has no snapshots and you configure the virtual machine snapshot setting, all snapshots you take afterwards will be stored in the folder you specify.
http://technet.microsoft.com/pt-pt/library/dd560637%28v=ws.10%29.aspx
Reducing the available RAM for the VM would reduce the size of the snapshot, what better than have the machine turn off, not using any memory.
New Questions 12
Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named DC5. DC5 has a Server Core Installation of Windows Server 2012 R2.
You need to uninstall Active Directory from DC5 manually. Which tool should you use?
A. The dsamain.exe command
B. The ntdsutil.exe command
C. The Remove-ADComputer cmdlet
D. The Remove-WindowsFeature cmdlet
Answer: C
Explanation:
The Remove-ADComputer cmdlet removes an Active Directory computer. Example: Remove-ADComputer -Identity "FABRIKAM-SRV4"
Remove one particular computer.
References:
http://technet.microsoft.com/en-us/library/ee662310.aspx http://support.microsoft.com/kb/216498
http://technet.microsoft.com/en-us/library/ee617250.aspx
New Questions 13
You have a Hyper-V host named Server1 that runs Windows Server 2012 R2. Server1 hosts 50 virtual machines that run Windows Server 2012 R2.
Your company uses smart cards for authentication.
You need to ensure that you can use smart card authentication when you connect to the virtual machine by using Virtual Machine Connection.
What should you configure?
A. The RemoteFX settings
B. The Enhanced Session Mode Policy
C. The NUMA Spanning settings
D. The Integration Services settings
Answer: B
New Questions 14
You have a server named Server1. Server1 runs Windows Server 2012 R2 and is located in a perimeter network.
You need to configure a custom connection security rule on Server1. The rule must encrypt network communications across the Internet to a computer at another company.
Which authentication method should you configure in the connection security rule?
A. Advanced
B. User (Kerberos V5)
C. Default
D. Computer (Kerberos V5)
E. Computer and user (Kerberos V5)
Answer: : A
Explanation: Explanation:
You need to make use of Advanced authentication method to ensure that communication is encrypted over the network to the other company from your custom connection security rule on Server1.
References:
http://technet.microsoft.com/en-us/library/bb742516.aspx
Training Guide: Installing and Configuring Windows Server 2012 R2, Chapter 8: File Services and Storage, p. 428.
New Questions 15
Your network contains an Active Directory domain named contoso.com. All domain controllers run Windows Server 2012 R2.
You need to ensure that the local administrator account on all computers is renamed to L.Admin.
Which Group Policy settings should you modify?
A. Restricted Groups
B. Security Options
C. User Rights Assignment
D. Preferences
Answer: B
Explanation:
In Group Policy Object Editor, click Computer Configuration, click Windows Settings, click Security Settings, click Local Policies, and then click Security Options.
In the details pane, double-click Accounts: Rename administrator account.
The Security Options node includes security settings regarding interactive logon, digital signing of data, restrictions of access to floppy and CD-ROM drives, unsigned driver
installations as well as logon dialog box behavior. This category also includes options to configure authentication and communication security within Active Directory.
Recommend!! Get the Free 70-410 dumps in VCE and PDF From 2passeasy, Welcome to download: https://www.2passeasy.com/dumps/70-410/ (New 496 Q&As Version)