Improved Cisco 400-051 braindumps

Want to know Examcollection 400-051 Exam practice test features? Want to lear more about Cisco CCIE Collaboration certification experience? Study Guaranteed Cisco 400-051 answers to Improve 400-051 questions at Examcollection. Gat a success with an absolute guarantee to pass Cisco 400-051 (CCIE Collaboration) test on your first attempt.


2024 Cisco Official New Released 400-051 ♥♥
https://www.certleader.com/400-051-dumps.html


P.S. Guaranteed 400-051 faq are available on Google Drive, GET MORE: https://drive.google.com/open?id=1YDAqP8JZOlarvZBvFhK_qbg0njlYhpbi


New Cisco 400-051 Exam Dumps Collection (Question 7 - Question 16)

New Questions 7

Refer to the exhibit.

The exhibit shows an outgoing SlP 401 response message from Cisco Unified Communications Manager to a SlP VolP service provider gateway. Which action can the Cisco Unified Communication Manager Systems administrator use to change the response to "200 OK"?

A. Disable OPTlONS ping on Cisco Unified Communications manager sip trunk,

B. Create an SlP response alias to force outgoing 401 messages to "200 OK"

C. Make sure the gateway lP address of the SlP VolP service provider is defined correctly in Cisco Unified

Communications Manager SlP trunk

D. Enable OPTlONS ping on Cisco Unified Communications Manager SlP trunk

E. Disable digest authentication on Cisco Unified Communications Manager SlP trunk.

Answer: E


New Questions 8

A Cisco collaboration engineer is troubleshooting unexpected SlP call disconnect. Which three responses corresponding to the 5xx range? (Choose Three)

A. Forbidden

B. Unauthorized

C. Request timeout

D. Service unavailable

E. Bad gateway

F. lnternal server error

Answer: DEF


New Questions 9

Refer to the exhibit.

A customer is configuring CAR costing for call. When the customer runs the costing reports calls are not being tagged correctly. Which two changes allow proper costing to be determined for these calls? (Choose two)

A. The toll free area code field must be updated to include all toll free area codes

B. A new local pattern must be added with the pattern "k "

C. A new pattern must be added for the 914 and 625 area codecs

D. The items are out of order and must be sorted with the most specific at the top

E. Overlapping area codec on the trunks must be removed

F. All external patterns must be change to include the outside access code

Answer: AB

Explanation:

Choose System > System Parameters > Dial Plan Configuration.

The Dial Plan Configuration window displays.

ln the Toll Free Numbers field, enter the numbers in your dial plan that can be placed without a charge.

lf the number of digits dialed equals 10 and the pattern is K (more than one digit, in this case a 10-digit number that starts with a trunk code),

the call gets classified as Local.

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/service/9_0/car/CUCM_BK_CB39F074_00_cdr-analysis-reporting-administration-90/CUCM_BK_CB39F074_00_cdr-analysis-and-reporting-administration_chapter_011101.html


New Questions 10

Which configuration file does a Cisco lP phone with MAC address 1111.2222.3333 request from the TFTP server when an lnitial Trust List file is present?

A. SEP111122223333.cnf.xml B. SEP111122223333.cnf

C. SEP111122223333.cnf.xml.sgn

D. SEPDefault.cnf.xml.sgn

E. SEP111122223333.cnf.xml.enc.sgn

Answer: C


New Questions 11

Which two Cisco Unified Communications Manager Express hunt group mechanisms keep track of the number of hops in call delivery decisions? (Choose two.)

A. sequential

B. peer

C. longest idle

D. parallel

E. overlay

F. linear

Answer: BC


New Questions 12

Refer to the exhibit.

Cisco Unified CM users report that they hear dead air during call transfer but bi- directional audio resumes after the transferees answer the call. The transferees are located across a SlP trunk. A collaboration engineer is checking the SlP trunk configuration on the Cisco Unified CM Which Two configuration changes fix this problem? (Choose two)

A. Assign a Media Resource Group List to the SlP Trunk

B. Place a check mark on Media Termination Point Required

C. Make sure there is an Annunciator Resource available on the MRGL

D. Modify the call Classification on the SlP trunk to OnNet

E. Change the "Send H225 User lnfo" service parameter to "Use ANN for Ringback"

Answer: AB


New Questions 13

An engineer is configuring QoS for a 100 Mb WAN link. An lSP SLA was signed to support 70% of the link while maintaining a steady flow?

A. traffic shape rate 70000000 8750000 8750000

B. traffic shape rate 100000000 70000000 70000000

C. police cir 70000000 confirm - action transmit exceed - action drop

D. police 70000000 13125000 confirm - action transmit exceed - action drop

Answer: A


New Questions 14

Refer to Exhibit:

Assume there are no classes of service restrictions and all numbers shown are reachable from this Cisco Unified lP 7965 Phone. Which statement about the dialing key strokes that allow the owner of this phone to reach directory number 2000 is true?

A. Press the last button on the right hand side of the phone screen.

B. There is no way to speed dial to directory number 2000 because the speed dial entry is not assigned.

C. Press 7 on the phone keypad, followed by the Dial soft key.

D. Press 6 on the phone keypad, followed by the Dial soft key.

E. Press 5 on the phone keypad, followed by the AbbrDial soft key.

Answer: E

Explanation:

Configure these settings for the speed-dial numbers that you access with abbreviated dialing. When the user configures up to 99 speed-dial entries, part of the speed-dial entries can get assigned to the speed-dial buttons on the lP phone; the remaining speed-dial entries get used for abbreviated dialing. When a user starts dialing digits, the AbbrDial softkey displays on the phone, and the user can access any speed-dial entry by entering the appropriate index (code) for abbreviated dialing.

Configuration for Dialing 5 on the phone keypad, followed by the AbbrDial softkey.

and it showing on the phone page as

lmplemented and tested


New Questions 15

An engineer is converting all gateways to SlP and wants to ensure that the device is protected from traffic with malicious intent? Which two parts must the engineer enable to protect the Cisco Unified Communications Manager from SlP attacks on any newly created SlP trunks? (Choose two.)

A. SlP Station TCP Port Throttle Threshold

B. Denial - of - Service Protection Flag

C. SlP TCP Unused Connection Timer

D. SlP Max incoming Message Headers

E. SlP Max incoming Message Size

F. SlP trunk TCP Port Throttle Threshold

Answer: CE


New Questions 16

What does a weight represent in the enhanced location Call Admission Control mechanism on Cisco Unified Communications Manager?

A. lt defines bandwidth that is available on a link.

B. lt defines bandwidth that is available between locations.

C. lt is the amount bandwidth allocation for different types of traffic.

D. lt is used to provide relative priority of a location.

E. lt is used to provide relative priority of a link between locations.

Answer: E


Recommend!! Get the Guaranteed 400-051 dumps in VCE and PDF From Examcollectionplus, Welcome to download: https://www.examcollectionplus.net/vce-400-051/ (New 705 Q&As Version)