Renew 300-320 Exam Study Guides With New Update Exam Questions

Master the ccdp 300 320 Designing Cisco Network Service Architectures content and be ready for exam day success quickly with this Testking atr 42 300 320 free practice test. We guarantee it!We make it a reality and give you real 300 320 vce questions in our Cisco cisco 300 320 braindumps.Latest 100% VALID Cisco 320 300 Exam Questions Dumps at below page. You can use our Cisco cisco 300 320 dumps braindumps and pass your exam.


2024 Cisco Official New Released 300-320 ♥♥
https://www.certleader.com/300-320-dumps.html


Q1. Two recently merged companies are using EIGRP and RIP. Which two strategies can facilitate a smooth migration? (Choose two.) 

A. Create an OSPF instance between EIGRP and RIP routing domains. 

B. Redistribute routing information between the RIP and EIGRP protocols. 

C. Add EIGRP and then remove RIP on the acquired company network. 

D. Use the EIGRP administrative distance to migrate one site at a time. 

E. Use static routes in place of dynamic routing between companies. 

Answer: B,C 

Q2. What is the recommended subnet between two sites that have a point-to-point connection to conserve IP addresses? 

A. 255.255.255.0 

B. 255.255.252.0 

C. 255.255.255.252 

D. 255.255.255.240 

Answer:

Q3. Which of the following is most accurate with respect to designing high availability within the Enterprise Campus network? 

A. High availability at and between the Distribution and Access layers is as simple as redundant switches and redundant Layer 3 connections 

B. Non-deterministic traffic patterns require a highly available modular topology design 

C. Distribution layer high availability design includes redundant switches and Layer 3 equal-cost load sharing connections to the switched Access and routed Core layers, with a Layer 3 link between the Distribution switches to support summarization of routing information from the Distribution to the Core 

D. Default gateway redundancy allows for the failure of a redundant Distribution switch without affecting endpoint connectivity 

Answer:

Q4. Which route summarization most efficiently reduces perceived network complexity that is composed of subnetworks ranging from 172.16.20.0/24 to 172.16.36.0/24? 

A. 172.16.8.0/21 

B. 172.16.8.0/19 

C. 172.16.20.0/20 

D. 172.16.0.0/18 

E. 172.16.20.0/19 

Answer:

Q5. Which two of these correctly describe asymmetric routing and firewalls? (Choose two.) 

A. only operational in routed mode 

B. only operational in transparent mode 

C. only eight interfaces can belong to an asymmetric routing group 

D. operational in both failover and non-failover configurations 

E. only operational when the firewall has been configured for failover 

Answer: C,D 

Q6. Which VRF component ensures control plane separation between the different Layer 3 VPNs? 

A. FIB 

B. routing protocol instance 

C. RIB 

D. a subset of the router interfaces 

Answer:

Q7. A network engineer must provide 40mb connections from the data center to the corporate office and two remote offices. What WAN connectivity option will outsource the routing in cooperation with the service provider? 

A. Ethernet Private Line 

B. Ethernet Multipoint Service 

C. MPLS VPN 

D. VPLS 

Answer:

Q8. The requirement for high availability within the Data Center network may cause the designer to consider which one of the following solutions? 

A. Construct a hierarchical network design using EtherChannel between a server and two VDCs from the same physical switch 

B. Utilize Cisco NSF with SSO to provide intrachassis SSO at Layers 2 to 4 

C. Define the Data Center as an OSPF NSSA area, advertising a default route into the DC and summarizing the routes out of the NSSA to the Campus Core 

D. Implement network services for the Data Center as a separate services layer using an active/active model that is more predictable in failure conditions 

Answer:

Q9. CoS is applied for Layer 2 markings in an Ethernet environment. Which protocol must be configured on the Layer 2 switch port for CoS to work? 

A. MPLS 

B. IEEE 802.1W 

C. IEEE 802.1Q 

D. IEEE 802.1S 

Answer:

Q10. Given the addresses 10.10.16.0/24 and 10.10.23.0/24, which option is the best summary? 

A. 10.10.0.0/16 

B. 10.10.8.0/23 

C. 10.10.16.0/23 

D. 10.10.16.0/21 

Answer: